Home ] Old Reports ] CARPET MILL LIST ] Links ] Goverment Standards ] Research ] Tests Procedures ] Tools ] Work Sheets ]


Appearance Retention Reports ] Browning Reports ] Cleaning Errors Reports ] Color Loss Reports ] Delamination Reports ] Design Flaws Reports ] Double Stick Reports ] Fading Reports ] Fuzzing Reports ] [ Installation Reports ] Latex Problems Reports ] Lines, Bands, & Streaks Reports ] Maintenance Reports ] Matting & Crushing Reports ] Pooling Reports ] Shedding Reports ] Side Match Reports ] Specification Reports ] Thickness & Weight Reports ] Upholstery Reports ] Water Damage Reports ] Yarn Slippage Reports ] Yellowing Reports ]


Home ] Berber ] Buckling From Power Stretching in Length ] Buckling  Lees Commercial ] Buckling on a Direct GlueDown ] Installations Errors Report made Humorous ] Installation Incorrect Pad1 ] Installation Errors with Urine ] Installation Errors-Side Match ] Lines from Star Roller ] Panels Width to Wide ] Seams are Fuzzy from Double Cut ] Seam Sealer on Seams ] Seam Failure, no seaming adhesive ] Unitary Back Carpet Rolled Once ]

 

Installation Reports

  The problems in these report above are due entirely to installation errors. The ones below include the list above, but could also fall into another category too.

  1. Buckling   Lees Commercial This report was commissioned by the management company and the installer stretched in this Lees Commercial carpet.
  2. Buckling From Power Stretching in Length This report was done for the dealer. The mill agreed to pay half of the claim. Average un-recovered extension   in the length was1.8% and 1.7% in the width.
  3. Installation Errors On Olefin Berber This report was done for a consumer.
  4. Installations Errors Report made Humorous This report was done for the consumer and although it is a serious report, the background information is humorous.
  5. Seams are Fuzzy from Double Cut This report was done for the carpet mill and the installer cut through the middle of yarns on a pool pile creating a fuzzy seam.
  6. Panels Width to Wide This report was written for the end user and most of the panels were not trimmed.
  7. Bad Latex Bad Pad The CUSHION 7/16 Inch Rebond and the DENSITY: 3 lb.s per cubit foot. The AVERAGE LATEX BUNDLE WRAP 58% and AVERAGE LATEX PENETRATION’ 54%.
  8. Bleach Spots from Railway Iron This report was done for the carpet mill and there was an agreement in the end for the installer, carpet cleaner, and homeowner to do a three way split for the repair.
  9. Buckling on a Direct GlueDown This report was done for the carpet mill and there were no legs found in the glue where the buckling tock place.
  10. Formaldehyde Fading on Acrylic This report was done for a consumer after reconstruction of the his house. The contractor was as fault.
  11. Installation Incorrect Pad1 This report was done for a consumer. The cushion was 1/2 Inch Rebond 3 Lb./Sq. Ft.
  12. Installation Errors with Urine This report was done for a consumer who did not pay the contractor for the work done. The contractor loss in court in trying to collect his money.Their best defense was that the consumer had destroyed the carpet with animal accidents.
  13. Seam Failure, no seaming adhesive This report was commissioned by the mill and the problem reported was pulled yarns.
  14. Seam Sealer on Seams This report was commissioned by the claimant.
  15. Seams are Fuzzy from Double Cut This report was done for the carpet mill and they got low-lines from manufacturing too.
  16. Side Match from Installation Errors The panels were too wide.
  17. Yarn Slippage from too wide panels The panel widths indicated that the selvage was not trimmed enough to satisfy standards.
  18. Unitary Back Carpet Rolled Once This report was commissioned by the mill and installer installed two different carpet with the same faceyarn pattern; one with an ActionBac and the other with an unitary backing. He rolled both of them only once.